Nano Additives 2018-B1 (Edge Banding)

4dhcpmingchen

Your position Home page -> Product -> Multi-modification of PVC -> Nano Additives 2018-B1 (Edge Banding)

Product Introduction

The 2018-B1 multi-component nanoparticle non-metallic powder is used as a polymerization carrier, and oligomers and thermoplastic elastomers are incorporated to form a new type of macromolecular high-activity alloy material through a special polymerization process and functional composite coating modification technology.
Promote the gelation and plasticization of PVC, fast plasticization during processing, increase in viscosity, increase in thermal strength, uniform dispersion, improve melt fluidity, good plasticization degree, surface Good gloss, no precipitation, good weather resistance.

Product Specifications

Product Advantage	1. Product processing efficiency is immediately increased by 20-30%
	2. Directly reduce product formula cost by 10-20%
	3.2:1 can achieve 3:1 quality effect
Reason for Application	1. Excellent plasticization, good phase fusion, energy consumption reduction, and performance enhancement
	2. Wide range, high temperature resistance, stable system, fast speed
	3. High strength, low dosage, high cost performance
	4. Good weather resistance, fast replacement, that is, comparison
Specialized application	PVC edge banding, furniture edge banding, self-adhesive edge banding, PVC calendering/casting edge banding

Frequently Asked Questions about Edge Banding: Sweep away:

FAQ Analysis:	FAQ:
1. The surface of the product is rough and the color is uneven; 2. The surface and bottom of the edge band are uneven, and the thickness is uneven; 3. Edge trimming, bending and whitening are serious; 4. Insufficient strength, poor elasticity and poor toughness; 5. The taste of the edge band is too large;	1. The surface gloss of the product is good and the color is similar; 2. The surface and bottom surface of the edge banding strip should be flat, and the thickness should be uniform; 3. Trimming of the same color, not easy to turn white when bent; 4. High strength, elasticity and wear resistance, good toughness; 5. Environmental protection, no obvious smell;

Application of PVC edge banding product illustration

Apply Report Analysis

Recipe reference

Original recipe
Name	Recipe Weight
PVC5	50
Heavy Ca	17
Calcium Zinc Stabilizer	4.2
ACR	2.8
CPE	3.8
Stearic acid	0.45
PE wax	0.6
Soybean Oil	3.5
Titanium Dioxide	0.4
MBS	1.5
Total	85.25

Nanoformulation
PVC	50
heavy calcium	25-50
Calcium Zinc	4.2-5.5
Nano B	3.0-6.0
Stearic acid	0.45~0.6
PE wax	0.6~0.8
Titanium Dioxide	0.45
Soybean Oil	2.5

Hongfu • Application Cases

Deeply excavating customer needs, is the customer is the best friend

WPC floor	pvc profile	pvc pipe
pvc foam board	Extrusion board	U-PVC upper and lower water pipes

Hongfu • Partners

10 years of stable and friendly cooperation with more than 100 production enterprises

NECOWOOD	HongKe	Red Wave
Yuesu	BETTO WOOD	clear plastic
Guangzhou Plastic	Zhongtai Group	Gudi Technology

The source manufacturer, the service is guaranteed, and the purchase is more assured!

8 advantages of Hongfu new material productsEight core advantages

Scientific research patent

Highly active material
toughening steel
Efficiency improvement

reduce costs

Plasticization optimization

wide range

high strength